Mitsubishi FR-A500 Series - 1.3 Structure

1.3 Structure
OUTLINE
3
1.3 Structure
1.3.1 Appearance and structure
(1) Front view (2) Without front cover
POWER lamp
ALARM lamp
Operation panel (FR-DU04)
Brake resistor* (Fitted to the back)
Accessory cover
Wiring port cover for option
Front cover
Rating plate
Capacity plate
Wiring cover
PU connector
(Provided with modular jack type relay connector
)
(For use with RS-485 cable communication)
Modular jack type relay connector compartment
Inboard option mounting positions
Control circuit terminal block
Main circuit terminal block
*7.5K or less inverters are equipped with an inboard brake resistor.
Note: The "EC" version of the FR-A500 uses pheonix type connectors for the control circuit terminal block.