APPENDICES
223
Data Codes
Func-
tion
Parameter
Number
Name
Read Write
Link Parameter Extension
Setting (Data code 7F/FF)
318 Y5 output selection 12 92 3
Analog
output, digital
output
319 Y6 output selection 13 93 3
320 RA1 output selection 14 94 3
321 RA2 output selection 15 95 3
Relay
output
322 RA3 output selection 16 96 3
330 RA output selection 1E 9E 3
331 Inverter station number 1F 9F 3
332 Communication speed 20 A0 3
333 Stop bit length 21 A1 3
334 Parity check yes/no 22 A2 3
335 Communication retry count 23 A3 3
336 Communication check time interval 24 A4 3
337 Waiting time setting 25 A5 3
338 Operation command right 26 A6 3
339 Speed command right 27 A7 3
340 Link start mode selection 28 A8 3
341 CR
•
LF yes/no selection 29 A9 3
Computer link function
342 E
2
PROM write selection 2A AA 3
900 FM terminal calibration 5C DC 1
901 AM terminal calibration 5D DD 1
902 Frequency setting voltage bias 5E DE 1
903 Frequency setting voltage gain 5F DF 1
904 Frequency setting current bias 60 E0 1
905 Frequency setting current gain 61 E1 1
990 Buzzer control 5A DA 9
Calibration functions
991 LCD contrast 5B DB 9
Second parameter switch-over 6C EC
Running frequency (RAM) 6D ED
Frequency
setting
Running frequency (E
2
PROM) 6E EE
Monitor 6F
Output current monitor 70
Output voltage monitor 71
Special monitor 72
Frequency
monitor
Special monitor selection No. 73 F3
Most recent No. 1, No. 2/alarm display
clear
74 F4
Most recent No. 3, No. 4 75
Most recent No. 5, No. 6 76
Alarm
display
Most recent No. 7, No. 8 77
Inverter status monitor/run command 7A FA
Operation mode acquisition 7B FB
All clear
FC
Inverter reset
FD
Link parameter extension setting 7F FF
Note: Note that the parameters Pr. 77 and Pr. 79 are accessible for computer link operation which uses the
PU connector, but they are inaccessible for computer link operation which uses the option (FR-
A5NR).
To Next Page
Loading...
