Mitsubishi FREQROL-E700

4-17
4
4.2.10 Parameter List
After the required items are all set, parameter setting is congured based on the input setting. Parameter name
and congured value are displayed in the Parameter List. To write the parameter setting to the inverter, write
from the Parameter List in the Main frame.
Click [Next] to return to "Inverter Selection" window. To close Easy Setup, click [Finish] in "Inverter Selection"
window. To set parameters for several inverters, select another inverter in "Inverter Selection" and set
parameters.
A
C BDE
No. Name Function and description
A Parameter setting eld Shows the parameter setting congured by Easy Setup in the list.
B
Next> Proceeds to "Inverter Selection".
C
<Back Returns to "Start Command and Frequency (Speed) Setting Method".
D Cancel Disables the settings and closes Easy Setup.
E Help Displays Help window.