Mitsubishi FREQROL-E700

4-5
4
4.1.5 Screen conguration (Navigation area)
The Navigation area is for showing registered inverter information, switching of operation mode and ONLINE/
OFFLINE, sending of start/stop command, changing of the set frequency, or starting Setting Wizard. "Test
Operation", "System Settings", "Troubleshooting" and "Setting Wizard" are available in this area.
The Upper part of the Navigation area displays "Test Operation", and the lower part displays "System View".
Select [System Setting], [Troubleshooting] or [Setting Wizard] under [View] menu to switch the function
displayed in "System View".
"Test Operation"
"System Settings" "Troubleshooting" "Setting Wizard"