Mitsubishi FREQROL-E700 User Manual

4-6
4.1.6 Screen conguration (System area)
The System area is for showing and reading/writing parameters, or for diagnosis and converting from parameter
setting of conventional model. "Parameter List", "Diagnosis", and "Convert" are available in this area.
Select [Parameter List], [Diagnosis], or [Convert] under [View] menu, or click icons on the tool bar to switch the
function displayed in the System area.
"Parameter List"
"Diagnosis" "Convert"

Mitsubishi FREQROL-E700 Specifications

General

Series	FREQROL-E700
Output Frequency	0 to 400Hz
Control Method	V/F control, Vector control
Overload Capacity	150% for 60 seconds
Protection Functions	Over voltage, Under voltage, Over current, Overload, Phase loss
Communication Protocols	CC-Link, Profibus-DP
Built-in Functions	PID control
Braking Unit	Built-in optional
Ambient Temperature	-10 to +50°C
Storage Temperature	-20 to +65°C
Humidity	Up to 90% (non-condensing)
Altitude	Up to 1000m above sea level
Enclosure	IP20
Cooling Method	Forced air cooling (fan)
Input Voltage	200V, 400V