4-12
4.2.5 Automatic detection
Click [Next] to detect inverter of which communication is available.
A
B
F E
D
GH
C
No. Name Function and description
A Message area
Shows a state of automatic detection. When an inverter is detected, the color turns blue, and
shows a result of detection. (If an error occurred during automatic detection, the color turns
red, and shows error description.)
B Detection Results
Shows a result of automatic detection. A station during detecting is displayed in blue. And
when an inverter is detected, inverter model name is displayed. (For a station failed for detec-
tion, the color turns red, and shows error code.)
C
Start Starts automatic detection when clicked.
D
Abort Aborts automatic detection.
E
Next> Proceeds to "Inverter Selection".
F
<Back Returns to "Inverter Setting Method".
G Cancel Disables the settings and closes Easy Setup.
H Help Displays Help window.
To Next Page
Loading...
