6-5
Question 3
Select the appropriate operation panel operation to perform the following operations.
• Selecting frequency and other settings
( )
• Finalizing frequency and other settings ( )
• Starting motor operation ( )
• Stopping motor operation ( )
• Setting mode switchover ( )
• External/PU operation mode switchover ( )
• Switching monitor displays (output frequency/output current/output voltage) ( )
Question 4
What are the correct input values for parameters "Pr. 3 Base frequency" and "Pr. 19 Base frequency voltage" to
satisfy the following specications so that the inverter operates at the optimal state.
<Specications>
• Motor type: High-speed motor
• Motor base frequency: 50Hz
• Motor base frequency voltage: 200V
"Pr. 3: Base frequency": ( ) Hz
"Pr. 19: Base frequency voltage": ( ) V
A. RUN key B. STOP/RESET key C. MODE key D. SET key E. PU/EXT key
F. M Dial
G. SET key
To Next Page
Loading...
