11-5
3. Temporarily connect hook of outside chain
as shown.
4. Pull the middle chain as far as possible and
connect its hook.
5. Pull both ends of outside chain as far as pos-
sible and connect hook .
6. Ensure that hooks and are flat on the tire
sidewalls. Also make sure that the chains are
not twisted.
7. Fasten extra chain links with a metal wire to pre-
vent them from hitting against other vehicle
parts.
8. Fit spring band . Attach the hooks of spring
band on the chain at even intervals with the
hook ends facing outward.
9. After driving the vehicle for 5 to 10 minutes,
check the chains for looseness or disconnected
hooks.
Z11190
Z11191
Z09329
Z09330
FEFG.book Page 5 Thursday, March 10, 2005 7:30 PM
To Next Page
Loading...
Need help?
General
