5-13
4. Turn the starter switch to the “ACC” position to
stop the engine.
Accelerator pedal
Racing the engine also increases fuel consumption.
Brake pedal
• Illumination of the warning lamp while the
vehicle is being driven shows that the disc brake
pads are due for replacement. Have the disc
brake pads inspected by an authorized dealer.
The warning lamp always illuminates when
the starter switch is turned from the “ACC” posi-
tion to the “ON” position. Provided it goes off
approximately three seconds later, the disc
brake pads are normal.
• Use the brake pedal correctly. P. 7-7
Pedals
WARNING
If you use a floor mat, lay it correctly and
make sure it is suitable for the size of the
vehicle. It is dangerous for a floor mat to
cover the accelerator pedal or for floor mats
to be laid in multiple layers since the acceler-
ator pedal may be prevented from returning
when released.
WARNING
Allowing empty beverage cans or other
objects to get under the brake pedal is
extremely dangerous as they will interfere
with brake pedal movement. Keep the floor
free of any objects obstructive to operation
of the pedal.
Z08812
Z08813
FEFG.book Page 13 Thursday, March 10, 2005 7:30 PM