12-69
• Installation
1. Return the air filter to its original position by
inserting it with its front facing you. Press the air
filter securely into the guides (one on each
side at the top and two at the bottom).
2. Install the tray by performing the removal steps
in reverse.
3. Install the lower panel and lower center panel in
that order by performing the removal steps in
reverse.
1 Exterior cleaning
1.1 Cleaning glass surfaces
Keep the vehicle’s windows and screens clean at all
times. Use glass cleaner and wipe it off with a
sponge or soft cloth.
CAUTION
Never apply rubbing compound to glass since it
leaves scratches.
1.2 Washing
Using a hose, wash the mud and dirt off the body
surfaces. Wash not only the surfaces around the
cab, but also the wheel housings and the underside
of the chassis.
Especially after you have driven in a coastal area or
on salted road in the winter, your vehicle should be
given a thorough washing. Also try to wax the body
surfaces once a month.
Cleaning your vehicle
WARNING
• Some cleaning fluids are poisonous or
flammable. Carefully follow the safety pre-
cautions shown on the container.
• Use solvent-based cleaning materials only
in a well ventilated area.
Open the windows when using solvent-
based cleaning materials in the cab.
• The following materials could injure you or
damage the vehicle, and should not be
used:
Acetone, lacquer thinner, enamel thinner,
nail enamel remover, and other volatile
solvents; laundry soap, bleach, deoxi-
dant, and other detergents; carbon tetra-
chloride, gasoline, benzene, naphtha, and
other petrochemicals.
Z11621
FEFG.book Page 69 Thursday, March 10, 2005 7:30 PM
To Next Page
Loading...
Need help?
General
