12-18 Simple inspection and service
2 Door hinge (4 points in total on both
sides; 8 points in Crew-cab models)
Recommended lubricant:
Chassis grease
NLGI No. 1 (Li soap)
3 Anchor hooks (two places)
<Not applicable to Crew-cab models>
Recommended lubricant:
Chassis grease
NLGI No. 1 (Li soap)
1 Engine oil
Performance, life, and startability of the engine
depend to a large degree on the engine oil. Always
use oil of the specified grade and viscosity.
The proper engine oil viscosity numbers for various
atmospheric temperature ranges are shown in the
diagram.
The first engine oil replacement during the run-in
period should be performed at the first 4,000 km
(2,500 miles).
CAUTION
Replace the engine oil earlier if the engine is fre-
quently used at high speeds or under high load-
ing.
Recommended lubricant:
Engine oil
API classification CD, CD/SF, CE, CE/SF, CF-4 or
JASO classification DH-1
SAE40, 30, 20W-20, 10W-30, 15W-40
Greasing intervals
Every 10,000 km
(6,000 miles)
Greasing intervals
Every 10,000 km
(6,000 miles)
Oils and fluids
Inspection
intervals
At the time of pre-operational
check
Replacement
intervals
Every 10,000 km
(6,000 miles)
Z10719
Z10720
Z02303
Atmospheric temperatures when engine is started.
FEFG.book Page 18 Thursday, March 10, 2005 7:30 PM
To Next Page
Loading...
Need help?
General
