12-64 Simple inspection and service
1 Fluid level check
Check the washer fluid level through level check
window .
When the level has dropped to the lower part of the
window or is not visible at all, refill the tank with
washer fluid.
2 Refilling
1. Open the assistant driver’s door.
2. Open windshield washer tank cap and pour in
a mixture of windshield washer fluid and tap
water until the level reaches the top of the check
window.
3. Close the cap tightly after refilling.
CAUTION
Substituting soapy water for washer fluid could
result in clogged washer nozzles or spots on
painted surfaces.
NOTE:
When it is very cold, the ratio of windshield washer
fluid to water should be increased in order to pre-
vent the mixture from freezing up.
Windshield washer – fluid level
check and refilling
Windshield washer fluid
quantity
Approx. 3 liters (3.2 qts)
Battery – check
WARNING
• The battery generates flammable hydro-
gen gas and should be kept away from
open flame and spark.
• When removing the battery, always dis-
connect the negative (–) terminal first and
reconnect it last. A spark can occur if a
tool touches the positive (+) terminal and
frame with the negative (–) terminal con-
nected.
• When handling the battery, wear safety
goggles to protect your eyes.
• Perform all battery checks with the engine
turned off.
Z12091
FEFG.book Page 64 Thursday, March 10, 2005 7:30 PM
To Next Page
Loading...
Need help?
General
