15-4 Maintenance schedule
Wheel and tire
××
Check disc wheel for corro-
sion, deformation and
cracks.
Measure inflation pressure
with tire gauge.
Check tire tread and side
wall for cracks and damage.
Measure tire tread groove
depth to make sure it is
deep enough.
Check tire tread for uneven
wear, stepped wear and
other abnormal wear.
12-52
× Rotate all tires. 12-62
Retightening
wheel nuts
××
Check wheel nuts for loose-
ness.
Check at the first 50 to 100
km/30 to 60 miles after
changing a wheel.
12-61
SUSPENSION SYSTEM
Suspension
springs
×
Check for broken springs
and tilt of vehicle body
toward either side.
–
Retightening
U-bolts
××
Check U-bolt nuts for loose-
ness.
Check at the first 1‚000 km/
600 miles after removing
and retightening U-bolt
nuts.
–
BRAKING SYSTEM
Service brake
pedal
×
Check brake pedal play and
stroke.
12-49
Brake
performance
×
Depress the brake pedal
and check that the brakes
work effectively and evenly
on all wheels.
12-50
Disc brake pad
and disc
×
Check disc brake pad and
disc for damage and wear.
–
Brake lining ×
Check lining for wear
through inspection hole.
–
Brake drum ×
Disassemble and check
drum for wear, crack and
damage.
Parking brake
lever stroke
×
Check parking brake lever
stroke.
12-51
Item
Time of inspection and maintenance
Working procedures
Ref.
page
Pre-operational checks
New vehicle at 4,000 km/
2,500 miles
Inspection interval
Every 10,000 km/
6,000 miles
Every 20,000 km/
12,000 miles
Every 30,000 km/
18,000 miles
Every 40,000 km/
24,000 miles
Every 50,000 km/
30,000 miles
Every 90,000 km/
54,000 miles
Every 250,000 km/
150,000 miles
FEFG.book Page 4 Thursday, March 10, 2005 7:30 PM
To Next Page
Loading...
