EasyManua.ls Logo

Mitsubishi FUSO FE 2012 - Selections and Settings in Outside Air Temperature Mode

Mitsubishi FUSO FE 2012
481 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-12 Instruments and warning lamps
3.3 Outside air temperature <vehicles with
fully automatic air conditioner>
If you select the outside air temperature mode by
pressing the MODE switch , the outside air tem-
perature around the front of the cab is indicated.
NOTE:
As the temperature is sensed at the outside air inlet
on the cab, the indicated temperature may differ
from the actual outside air temperature under cer-
tain traffic or air conditioner operating conditions.
The following selections and settings are possi-
ble for the outside air temperature mode:
Selecting the unit of temperature display
between degree Fahrenheit (°F) and degree
Celsius (°C)
Selecting the bottom-left display on the
screen between temperature and time
Setting an alarm when the outside air tem-
perature falls below a preset temperature
Selections and settings in outside air tem-
perature mode
Z21565
Z21553
FE_FG.book Page 12 Tuesday, February 8, 2011 4:00 PM

Table of Contents

Related product manuals