4-3
1.2 Making adjustments
• Slide seat forward or backward while holding
slide adjustment lever raised. After making
the adjustment, release the lever and move the
seat back and forth slightly to lock it in position.
• To adjust the angle of the seatback , raise
reclining lever .
• Lower the armrest to use it.
• Lumbar support lever <option>
Pull the lever to adjust the hardness of the
lumbar support in the seatback as desired.
2 Assistant driver’s seat
Assistant driver’s seat
Center seat
It is possible to tip the seatback fully forward. With
the lever pulled, grasp the seatback at the top
and tip it forward.
After returning the seatback to its original position,
gently rock it to make sure it is locked in place.
NOTE:
If the lever is difficult to move, pull it while push-
ing the top of the seatback rearward. Then you will
be able to pull the lever easily.
Z21336
Z21337
FE_FG.book Page 3 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
