12-12 Simple inspection and service
2 In the driver’s seat
Start the engine and perform the following checks
and after while allowing the engine to warm up.
Coolant level
Check that the coolant level is between the
“FULL” and “LOW” marks on the reservoir
tank.
P. 12-55
Engine oil level
Check that there is sufficient engine oil using
the oil level gauge.
Change the engine oil if its level is above the
circle mark on the oil level gauge.
P. 12-24
Leakage of coolant, fuel and oil
Check the underneath of the vehicle for any
sign of leakage.
Z15730
Z21399
Z10751
Z21400
FE_FG.book Page 12 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
