6-20 Instruments and warning lamps
1. Press the MODE switch to select the illumina-
tion intensity mode .
2. Press the SELECT switch . Each time you
press the switch, the display toggles between
“DISP (DAY)” and “GAUGE (DAY)” . When
the light switch is in the or position, the
display toggles between “DISP (NIGHT)” and
“GAUGE (NIGHT)”.
3. With the item to be adjusted displayed on the
screen, press the SET/RES switch to
advance to the adjustment screen .
4. Adjust the brightness using the MODE switch or
SELECT switch.
• Press the MODE switch to reduce the bright-
ness.
• Press the SELECT switch to increase the bright-
ness.
5. Return to the illumination intensity display by
pressing the SET/RES switch.
Z21564
FE_FG.book Page 20 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
