3-12 Opening and closing
CAUTION
• Use the designated standard type of battery.
If the battery is replaced with an incorrect
type, the battery could explode.
• Attach the battery with the “+” mark facing
upward.
• Do not use a metal tool such as tweezers to
replace the battery. Doing so could cause a
short circuit.
• Dispose of used batteries in accordance with
local regulations. Inconsiderate disposal
could adversely affect the environment. For
disposal, wrap the battery with tape, vinyl
sheet, etc. for insulation so that the battery
cannot contact other metal objects or be
exposed to water.
• Do not expose the inside of the remote con-
trol switch to water, and keep it away from
dirt and dust. Otherwise, the switch could
fail.
1. Use a crosshead screwdriver to turn the
screw and remove the cover .
2. Place a new battery with the “+” mark facing
upward.
3. Reattach the cover and the screw.
4. Operate the switch and check that the remote
control works.
Designated battery Quantity
Lithium battery CR2032 1
Z20939
Z20940
FE_FG.book Page 12 Tuesday, February 8, 2011 4:00 PM
To Next Page
Loading...
Need help?
General
