EasyManuals Logo

Mitsubishi FUSO FE 2012 User Manual

Mitsubishi FUSO FE 2012
481 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
5-13
CAUTION
If you stop the engine immediately after
uphill or high-speed driving, the oil supplied
to the rotor shaft of the turbocharger will rise
to an abnormally high temperature and the
rotor shafts could seize up. To avoid this, run
the engine at idle for at least 3 minutes
instead of stopping it immediately.
The engine should only be stopped from an
idle. Stopping it at a high RPM could result in
an engine malfunction.
1. Hold down the brake pedal and apply the park-
ing brake.
2. Place the gearshift lever in the “P” position.
Make sure the gear position indicator shows “P”.
3. Allow the engine to idle for more than 3 minutes
before stopping it.
When the vehicle is in motion, engine parts
become extremely hot. This is particularly true
during uphill or high-speed driving. Therefore,
let the engine cool down sufficiently by allowing
it to idle for a time before stopping it.
4. Turn the starter switch to the “ACC” position to
stop the engine.
Z21530
Z16069
More than
3 minutes
Z21168
FE_FG.book Page 13 Tuesday, February 8, 2011 4:00 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi FUSO FE 2012 and is the answer not in the manual?

Mitsubishi FUSO FE 2012 Specifications

General IconGeneral
BrandMitsubishi
ModelFUSO FE 2012
CategoryAutomobile
LanguageEnglish

Related product manuals