Mitsubishi FX3U-64CCL User Manual

4 Installation
4.1 DIN rail mounting
22
FX3U-64CCL User's Manual
4.1 DIN rail mounting
The product may be mounted on a 35mm wide DIN46277 (DIN rail).
1 Fit the upper edge (A in the figure to the right) of the DIN
rail mounting groove onto the DIN rail.
2 Push the product onto the DIN rail.
• An interval space of 1 to 2 mm (0.04" to 0.08") between each unit is necessary.
3 Connect the extension cable.
Connect the extension cable (B in the figure to the right) to
the main unit, I/O extension unit/block or special function
unit/block on the left side of the product.
For information on the extension cable connection proce-
dure, refer to the respective product PLC manual.
→ Refer to the FX3G Hardware Edition
→ Refer to the FX
3U Hardware Edition
→ Refer to the FX
3UC Hardware Edition
• Example of anchoring
B
FX 3G /FX 3U
Series main unit
DIN rail
Other extension
equipment
FX 3U -64CCL
1 to 2mm
(0.04" to 0.08")
1 to 2mm
(0.04" to 0.08")
DIN rail
FX 2NC -CNV-IF or
FX
3UC -1PS-5V
1 to 2mm
(0.04" to 0.08")
1 to 2mm
(0.04" to 0.08")
FX
3UC Series
main unit
FX
3U -64CCL
Other extension
equipment

Mitsubishi FX3U-64CCL Specifications

General

Brand	Mitsubishi
Model	FX3U-64CCL
Category	Controller
Language	English