l
The
average fuel consumption will depend
on the driving conditions (road conditions,
how you drive, etc.). The displayed fuel con-
sumption may vary from the actual fuel con-
sumption. Treat the fuel consumption dis-
played as just a rough guideline.
l
The average fuel consumption display mem-
ories for auto reset mode and manual reset
mode are erased if the battery is disconnected.
l
The display setting can be changed to the pre-
ferred units {km/L, mpg (US), mpg (UK) or
L/100 km}.
Refer to “Changing the function settings
(when the ignition switch is “ON”)” on page
3-15.
Momentary fuel consumption display
E00521800557
While driving, this displays the momentary fuel con-
sumption, using a bar graph.
When the momentary fuel consumption surpasses
the average fuel consumption, the momentary fuel
consumption is displayed with a green bar graph.
Be conscious of maintaining the momentary fuel
consumption above the average fuel consumption,
it can help you drive with the better fuel consump-
tion.
NOTE
l
When the momentary fuel consumption can-
not be measured, the bar graph is not dis-
played.
l
The display setting can be changed to the pre-
ferred units {km/L, mpg (US), mpg (UK) or
L/100 km}.
Refer to “Changing the function settings
(when the ignition switch is “ON”)” on page
3-15.
l
It is possible to cancel the green bar graph.
Refer to “Changing the function settings
(when the ignition switch is “ON”)” on page
3-15.
S-AWC (Super-All Wheel Con-
trol) operation display
E00526200022
The
S-AWC operation status is displayed.
For further details, refer to “S-AWC (Su-
per-All Wheel Control) operation dis-
play” on page 4-31.
WARNING
l
Always concentrate on your
driving first. Keep your eyes
and mind on the road. Distrac-
tions while driving can lead to
an accident.
Function setting screen
E00521900170
The
“Display language”, “Temperature
unit”, “Fuel consumption unit”, and
“Average fuel consumption and speed re-
set method” etc. settings can be modi-
fied as desired.
Refer to “Changing the function settings
(when the ignition switch is “ON”)” on
page 3-15 for further details.
Interrupt display screen (when the ig-
nition switch is “ON”)
E00522000787
Warning display
When
there is information to be announced, such
as a system fault, a sound is emitted and the infor-
mation screen is switched to the warning display
screen.
Refer to the warning list and take the necessary
measures.
Refer to “Warning display list (when the ignition
switch is “ON”)” on page 3-26.
When the cause of the warning display is elimina-
ted, the warning display goes out automatically.
Instruments and controls
3-11
3
To Next Page
Loading...
Need help?
General
