USB input terminal*
E00761900015
You
can connect your USB memory device or
iPod* to play music files stored in the USB memo-
ry device or iPod.
The following explains how to connect and remove
a USB memory device or iPod.
Refer to the following sections for details on how
to play music files:
Refer to “To play from a USB memory device” on
page 5-46.
*: “iPod” is a registered trademark of Apple Inc. in
the United States and other countries.
How to connect a USB memory device
E00762000286
1. Park
your vehicle in a safe place and turn the
ignition switch to the “LOCK” position.
2. Open the USB input terminal cover (A) in
the glove box.
3. Connect a commercially available USB con-
nector cable (C) to the USB memory device
(B).
4. Connect
the USB connector cable (C) to the
USB input terminal (D).
CAUTION
l
Keep the lid of the glove box closed while
driving the vehicle. A lid or the contents
of the glove box could otherwise cause in-
juries.
NOTE
l
Do
not connect the USB memory device to
the USB input terminal directly.
The USB memory device may be damaged.
l
When closing the glove box, be careful not
to trap the USB connector cable.
5. To remove the USB connector cable, turn the
ignition switch to the “LOCK” position first
and perform the installation steps in reverse.
How to connect an iPod
E00762100131
1. Park
your vehicle in a safe place and turn the
ignition switch to the “LOCK” position.
2. Open the USB input terminal cover (A) in
the glove box.
For pleasant driving
5-80
5
To Next Page
Loading...
Need help?
General
