Screen Cause Solution (Reference)
l
Twin Clutch SST fluid temperature is too high. Refer to “Twin Clutch SST” on page 4-17.
l
You turned the ignition switch to the “ON” posi-
tion without fastening your seat belt.
l
Fasten your seat belt properly. Refer to “Driv-
er’s seat belt warning” on page 2-08.
l
There is a fault in the fuel system.
l
We
recommend you to consult a MITSUBISHI
MOTORS Authorized Service Point.
l
You
are driving with the parking brake still ap-
plied.
l
Release the parking brake. Refer to “Brake warn-
ing display” on page 3-36.
l
There
is a fault in the engine oil circulation system.
l
Immediately stop the vehicle in a safe place.
We recommend you to have it checked.
Refer to “Oil pressure warning display” on
page 3-37.
Instruments and controls
3-28
3
To Next Page
Loading...
