Mitsubishi LANCER User Manual

For emergencies
6-15
6
5. Remove the wheel nuts with the wheel nut wrench, then
take the wheel off.
6. Clean out any mud, etc. on the hub surface (F), hub bolts
(G) or in the installation holes (H) in the wheel, and then
mount the spare tire.
● The jack should not be used for any purpose other
than to change a tire.
● No one should be in your vehicle when using the
jack.
● Do not start or run the engine while your vehicle is
on the jack.
● Do not turn the raised wheel. The tires that are still
on the ground could turn and make your vehicle fall
off the jack.
CAUTION
!
● Handle the wheel carefully when changing the tire,
to avoid scratching the wheel surface.
WARNING
!
BK0102103US.book 15 ページ ２００９年１０月２６日 月曜日 午後１時３８分

Mitsubishi LANCER Specifications

General

Brand	Mitsubishi
Model	LANCER
Category	Automobile
Language	English