Mitsubishi MELSEC-A series

2. LET'S TRY USING-THE ASPUE
:, ,-,I. 1 UE~SEC-A
(2) Checking the test operation by using device designation (device moni-
toring)
(Change
the current value "15" of D20 to "240".)
0 HGO]
"'I $'" 10 Current value of D20
TbD 10 Set 'K240" at the cursor position D20
I
The current value "15' of 020
has now been changed to '240".
A display of output unit AY40
changes as follows:
Y181 Y1C
I
The testing operation of changing the current
value
of a word device by deitiice designation
has now been checked.
Keep the CPU in the RUN state.
Now, let's try checking the testing operation in
which the set value of a timer is changed when
the CPU is
in the RUN state.
2- 17