To Next Page

To Previous Page

Cruise control (if so equipped)

Features and controls 5-53

2. Accelerate or decelerate to your desired

speed, then press and release the SET -

switch (B) when the indicator is illumi-

nated. The vehicle will then maintain the

desired speed.

N00518500344

There are 2 ways to increase the set speed.

Press and hold the RES + switch (C) while

driving at the set speed, and your speed will

then gradually increase.

When you reach your desired speed, release

the switch. Your new cruising speed is now

set.

To increase your speed in small amounts,

press the RES + switch for less than about 1

second and release it.

Each time you press the RES + switch, your

vehicle will go about 1 mph (1.6 km/h) faster.

While driving at the set speed, use the accel-

erator pedal to reach your desired speed and

then press the SET - switch (B) and release

the switch momentarily to set a new desired

cruising speed.

N00518600273

There are 2 ways to decrease the set speed.

Indicator

NOTE

 When you release the SET - switch, the vehi-

cle speed will be set.

To increase the set speed

RES + switch

Accelerator pedal

To decrease the set speed

BK0212400US.book 53 ページ２０１４年４月１日　火曜日　午後２時２１分

Information Provided by:

Mitsubishi MIRAGE Service Manual

Other manuals for Mitsubishi MIRAGE