Mitsubishi MIRAGE Service Manual

Manual air conditioning (if so equipped)
Comfort controls 7-7
7
N00730300344
The air conditioning can only be used while
the engine is running.
N00730500304
N00736500205
When the ignition switch or the operation
mode is in ON, select the blower speed by
turning the blower speed selection dial.
Turning the dial clockwise will increase the
blower speed; turning the dial counterclock-
wise will decrease it. When the dial is set to
the “OFF” position, all fan-driven airflow
will stop.
N00736600248
The temperature control lever is used to select
the desired air temperature.
N00736700223
To change the amount of air flowing from the
vents, turn the mode selection dial. Refer to
“Changing the mode selection” on page 7-2.
Manual air conditioning (if so
equipped)
Control panel
1- Temperature control lever
2- Air selection lever
3- Mode selection dial
4- Electric rear window defogger
switch P.5-80
5- Air conditioning switch
6- Blower speed selection dial
Blower speed selection dial
Temperature control lever
1- Cooler
2- Warmer
NOTE
 While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
lever.
Mode selection dial
BK0212400US.book 7 ページ ２０１４年４月１日 火曜日 午後２時２１分
Information Provided by:

Mitsubishi MIRAGE Specifications

General

Brand	Mitsubishi
Model	MIRAGE
Category	Automobile
Language	English