Tire pressure monitoring system (if so equipped)
5-56 Features and controls
Put the operation mode in OFF or ACC.
Indicator is turned OFF.
N00530201553
The tire pressure monitoring system uses tire
inflation pressure sensors (A) on the wheels
to monitor the tire inflation pressures. The
system only indicates when a tire is signifi-
cantly under-inflated.
Tire pressure monitoring
system
(if so equipped)
The compact spare wheel (if so equipped)
does not have a tire inflation pressure sen-
sor.
When the spare tire is used, the tire pres-
sure monitoring system will not work
properly.
See an authorized Mitsubishi Motors
dealer as soon as possible to replace or
repair the original tire.
The tire pressure monitoring system is not a
substitute for regularly checking tire infla-
tion pressures.
Be sure to check the tire inflation pressures
as described in “Tires” on page 9-12.
The tire inflation pressure sensor (A) is
installed in the illustrated location.
• On vehicles with Type 1 sensor which has
the metallic air valve (B), replace grommet
and washer (C) with a new one when the
tire is replaced.
• On vehicles with Type 2 sensor which has
the rubber air valve (D), replace rubber air
valve (D) with a new one when the tire is
replaced.
For details, please contact your authorized
Mitsubishi Motors dealer.
BK0212400US.book 56 ページ ２０１４年４月１日 火曜日 午後２時２１分
To Next Page
Loading...
Need help?
General
