Mitsubishi MIRAGE Service Manual

Manual air conditioning (if so equipped)
7-10 Comfort controls
7
N00731400560
Set the mode selection dial (between “ ”
and “ ”) to remove frost or mist from the
windshield and door window.
Use this setting to keep the windshield and
door windows clear of mist, and to keep the
leg area heated (when driving in rain or
snow).
1. Set the mode selection dial to the “ ”
position.
2. Set the air selection lever to the outside air
position.
3. Select your desired blower speed by turn-
ing the blower speed selection dial.
4. Select your desired temperature by setting
the temperature control lever.
5. Push the air conditioning switch.
For quick defrosting
1. Set the mode selection dial to the “ ”
position.
2. Set the air selection lever to the outside air
position.
3. Set your blower to the maximum speed.
4. Set the temperature to the highest posi-
tion.
5. Push the air conditioning switch.
Defrosting or defogging (wind-
shield, door windows)
CAUTION
 For safety, make sure you have a clear view
through all the windows.
For ordinary defrosting
NOTE
 To defog quickly, direct the air flow from the
side vents toward the door windows.
 When defrosting, do not set the temperature
control dial near the maximum cool position.
This would blow cool air on the window
glass and fog it up.
NOTE
BK0212400US.book 10 ページ ２０１４年４月１日 火曜日 午後２時２１分
Information Provided by:

Mitsubishi MIRAGE Specifications

General

Brand	Mitsubishi
Model	MIRAGE
Category	Automobile
Language	English