Mitsubishi MIRAGE Service Manual

Automatic air conditioning (if so equipped)
7-16 Comfort controls
7
N00731700361
In normal conditions, use the system in the
AUTO mode and follow these procedures:
1. Push the AUTO switch.
2. Set the temperature control switch to the
desired temperature. The temperature can
be set within a range of around 61 to 89
(Type 1) or 17 to 31 (Type 2).
The vents, recirculation/outside air, blower
speed, temperature adjustment and ON/OFF
of air conditioning will be controlled auto-
matically.
N00731800115
Blower speed and vent mode may be con-
trolled manually by setting the blower speed
selection switch and the MODE switch to the
desired positions. To return to automatic
operation, press the AUTO switch.
N00732400466
To remove frost or mist from the windshield
and door windows, use the MODE switch or
defogger switch (“ ” or “ ”).
Use this setting to keep the windshield and
door windows clear of mist, and to keep the
leg area heated (when driving in rain or
snow).
1. Set the MODE switch to the “ ” posi-
tion.
2. Set the air selection switch to the outside
air position.
3. Select your desired blower speed by
pressing the blower speed selection
switch.
4. Select your desired temperature by press-
ing the temperature control switch.
5. Push the air conditioning switch.
Operating the air conditioning
system (automatic mode)
NOTE
 Set the temperature at about 75 (Type 1) or
24 (Type 2) under normal conditions.
Operating the air conditioning
system (manual mode)
Defrosting or defogging (wind-
shield, door windows)
CAUTION
 For safety, make sure you have a clear view
through all the windows.
For ordinary defrosting
BK0212400US.book 16 ページ ２０１４年４月１日 火曜日 午後２時２１分
Information Provided by:

Mitsubishi MIRAGE Specifications

General

Brand	Mitsubishi
Model	MIRAGE
Category	Automobile
Language	English