Mitsubishi MIRAGE Service Manual

AM/FM electronically tuned radio with CD player (if so equipped)
Comfort controls 7-25
7
If you keep pressing the button, fast-for-
ward begins.
3. When the “hours” digit is adjusted, press
the button to flash the “minutes” digit.
Press the or button to adjust the
“minutes” digit.
If you keep pressing the button, fast-for-
ward begins.
4. When the time is set, press the button
to stop the clock display from flashing.
N00702800012
1. Press and hold the /MENU button until
you hear a beep. “GracenoteDB” will
appear on the display.
Each time the /MENU button is
pressed, this switches in the order Grace-
note DB, PHONE SET and cancel.
2. Press the or buttons several times
to select “DB Version” and then press the
/MENU button to determine.
The Gracenote DB version is displayed.
N00702900013
It is possible to set the language used for
voice control.
1. Press and hold the /MENU button until
you hear a beep. “GracenoteDB” will
appear on the display.
2. Press the /MENU button to select
“PHONE SET”.
Then press the or buttons several
times to select “LANGUAGE” and then
press the /MENU button to determine.
NOTE
 Reset the time after the battery terminals are
disconnected and reconnected.
 Seconds do not appear in the clock display,
but after adjusting the “minutes” setting, the
clock begins to operate from 0 seconds.
To confirm the version number
of the Gracenote DB (vehicles
with a Bluetooth
®
2.0 interface)
A-
/MENU button
B-
button
C-
button
To change the language (vehi-
cles with Bluetooth
®
2.0 inter-
face)
A-
/MENU button
B-
button
C-
button
BK0212400US.book 25 ページ ２０１４年４月１日 火曜日 午後２時２１分
Information Provided by:

Mitsubishi MIRAGE Specifications

General

Brand	Mitsubishi
Model	MIRAGE
Category	Automobile
Language	English