N00765500089
1. Press the PWR switch to turn on the audio
system. The system turns on in the last
mode used.
2. Press the CD button several times to
switch to the BT-A (Bluetooth
®
) mode.
The input mode changes as follows every
time the CD button is pressed: CD mode
iPod mode Bluetooth
®
mode (if so
equipped) AUX mode CD mode.
The BT indicator are illuminated and then
the BT-A mode will be activated.
3. Connect your Bluetooth
®
device.
Refer to “Connecting the Bluetooth
®
2.0
interface and Bluetooth
®
device” on page
5-87.
4. Playback starts automatically.
N00765600035
To stop the playback, press the Stop button.
To restart the playback, press the Play/Pause
button.
N00765700036
To pause the playback, press and hold the
Play/Pause button until you hear a beep.
To restart the playback, press the Play/Pause
button.
N00703200013
To fast-forward/reverse the current track,
press the button or button.
To fast-forward the current track, press the
button. While the button is kept pressed,
the track will be fast-forwarded.
To fast-reverse the current track, press the
button. While the button is kept pressed, the
track will be fast-reversed.
N00765800037
Press the button repeatedly until the
desired file number appears on the display.
Press the button repeatedly until the
desired file number appears on the display.
4- TRACK indicator
5- Display
6- PAGE (Title scroll) button
7-
(Fast-reverse/Track down) button
8-
(Fast-forward/Track up) button
9- DISP (Title display) button
10- Play/Pause button
11- Stop button
12- RPT (Repeat) button
13- RDM (Random) button
To listen to tracks from a device
connected via Bluetooth
®
Depending on the connected device, the
playback may not start automatically.
In this case, operate the connected device to
start the playback.
To stop the playback (if supported
by the device)
To pause the playback (if sup-
ported by the device)
To fast-forward/reverse the track
(if supported by the device)
Fast-forward
Fast-reverse
To select a track (if supported by
the device)
Track up
Track down