7. PARAMETERS
7 - 50
No./symbol/
name
Setting
digit
Function
Initial
value
[unit]
Control
mode
CP CL
PD14
*DI6H
Input device
selection 6H
Any input device can be assigned to the CN1-41 pin.
_ _ x x Not used with the positioning mode. 08h
x x _ _ Positioning mode - Device selection
Refer to table 7.9 in [Pr. PD04] for settings.
39h
PD18
*DI8H
Input device
selection 8H
Any input device can be assigned to the CN1-43 pin.
_ _ x x Not used with the positioning mode. 00h
x x _ _ Positioning mode - Device selection
Refer to table 7.9 in [Pr. PD04] for settings.
07h
PD20
*DI9H
Input device
selection 9H
Any input device can be assigned to the CN1-44 pin.
_ _ x x Not used with the positioning mode. 00h
x x _ _ Positioning mode - Device selection
Refer to table 7.9 in [Pr. PD04] for settings.
08h
To Next Page
Loading...
