2. SPECIFICATION
(1) Specification of mechanism
Sewing area : X-Direction(left/right) Y-Direction(fore/backward)
: 100mm 80mm
Maximum sewing speed : 700spm
Sewing speed : 10 steps variable from 200 to 700 stitch/min
Stitch length : 0.1 to 12.7 mm
(Adjustable from 0.1mm to 12.7mm by 0.1mm resolution. )
Stitch type : Single needle lock stitch
Class of needle : Schmitz 794 #230
Needle bar stroke : 56.6 mm
Thread take up lever stroke : 94 mm
Stepping foot lift : 16mm
Work holder lift : 20mm (25max.)
Thickness of material : Max 10mm
Hook : Barrel shuttle hook
Bobbin : Large size bobbin
Thread trimmer system : Heat cut system
Amount of heating time is selectable by selecting setting table
Voltage IN : AC 210/230V OUT : AC 1V
Pre heating available by using Function Code 4
Thread :
#8～#00 (Synthetic)
Lubrication system : Manual oiling
Lubrication oil : White machining oil
X-Y drive system : Stepping motor and timing belt drive
Intermittent or continuous feeding
Machine dimension :
HEAD 410W x 780L x 540H TOTAL 1200W x 780L x 1320L
Weight : HEAD 92Kg TOTAL 172Kg
Type of controller : PLK-E-CU-20
(2) Specification of main motor
Type of motor : XL-554-20
2
To Next Page
Loading...
