Mitsubishi QJ71LP21 User Manual

5 - 4 5 - 4
MELSEC-Q
5 PARAMETER SETTINGS
Table 5.2 Remote I/O station PLC parameter setting items
Network station type
Parameter setting item
Remote I/O station
Reference
section
PLC system settings
—
Number of empty slots
Module synchronization settings
Section 5.2.1
PLC RAS settings
—
Error check
Section 5.2.1
Operational settings
—
Remote I/O switch settings
Assignment method
Forwarding parameter between devices
Section 5.2.1
I/O assignment
—
I/O Assignment
Standard setting
Section 5.2.1
: Always set : Default setting exists : Set as needed : Setting not required
Table 5.3 Remote I/O station network parameter setting items
Network station type
Parameter setting item
Remote I/O station
Reference
section
Ethernet Section 5.2.1
CC-Link Section 5.2.1
: Always set : Default setting exists : Set as needed : Setting not required
Table 5.4 Remote I/O station remote password setting items
Network station type
Parameter setting item
Remote I/O station
Reference
section
Password setting Section 5.2.1
Setting of password effective module Section 5.2.1
: Always set : Default setting exists : Set as needed : Setting not required
Refer to the intelligent function module user's manual for details about intelligent
function module parameters.

Mitsubishi QJ71LP21 Specifications

General

Brand	Mitsubishi
Model	QJ71LP21
Category	Controller
Language	English