EasyManuals Logo

Mitsubishi QJ71LP21 User Manual

Mitsubishi QJ71LP21
422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
1 - 1 1 - 1
MELSEC-Q
1 OVERVIEW
1 OVERVIEW
The MELSECNET/H system includes the following 2 types of networks:
1) PLC to PLC network for communications between a control station and normal
stations
2) Remote I/O network for communications between a remote master station and
remote I/O stations
This is the manual to read when building a remote I/O network for MELSECNET/H
systems (hereafter called MELSECNET/H). If you are building a MELSECNET/H
network for PLC to PLC network, please refer to the Q-corresponding MELSECNET/H
network system reference manual. (PLC to PLC network) (SH-080049)
POINT
The Q00JCPU, Q00CPU and Q01CPU cannot configure a remote I/O network in a
MELSECNET/H network system.
REMARK
The previous network, called MELSECNET/10H is now called MELSECNET/H.
1.1 Overview
The MELSECNET/H remote I/O network system has more functionality and capacity
than the former network system, MELSECNET/10 network system (hereafter referred
to as MELSECNET/10).
As the MELSECNET/H remote I/O network adopts the same module mounting method
as the usual one (mounting I/O modules and intelligent function modules onto the main
base unit/expansion base unit), each module mounted on the remote I/O stations can
be handled in the similar way as the basic one.
In addition, the applicability to the MELSECNET/10 remote I/O network has been
further enhanced so that the FA system can be easily configured.
In the MELSECNET/H remote I/O network optical loop system, the communication
speed can be set to 25 Mbps or 10 Mbps.
Network system Communication speed
Optical loop 1 25 Mbps
MELSECNET/H
Optical loop, coaxial cable 10 Mbps
1: QJ71LP21-25, QJ71LP21S-25, QJ72LP25-25 only
Remote I/O station
QCPU
GX Developer
Control station (MELSECNET/10 mode)
Control station (MELSECNET/H mode)
GX Developer
QCPU normal station
QCPU normal station
QCPU normal station
Remote I/O station Remote I/O station Remote I/O station
MELSECNET/H (25Mbps)
PC network
Remote master station
MELSECNET/H (10Mbps)
remote I/O network
MELSECNET/H (25Mbps) remote I/O network
MELSECNET/H (10Mbps)
PLC to PLC network
QnACPU
normal station
AnUCPU
normal station
QCPU
normal station
1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi QJ71LP21 and is the answer not in the manual?

Mitsubishi QJ71LP21 Specifications

General IconGeneral
BrandMitsubishi
ModelQJ71LP21
CategoryController
LanguageEnglish

Related product manuals