Mitsubishi S4L User Manual

159 / 195
Service Manual Mitsubishi SL-Series diesel engines
Version 08/2004
GOVERNOR
ENGLISH
FUEL SYSTEM
FUEL SYSTEM
41 GOVERNOR
41.1 Disassembly and inspection
Disassembly sequence
1. Tie rod spring
2. Tie rod
3. Speed control lever
4. Spring pin
5. Grooved pin
6. Governor shaft (remove 7 thru 11 as an assembly)
7. Governor lever
8. Start spring
9. Tension lever
10. Governor spring
11. Governor spring lever
12. Governor case
Check sliding sleeve
contact face for wear
Make sure levers move freely
Check shaft
for defects
Check sliding sleeve for wear or
damage. Make sure it moves freely
Check weights for wear
Check spring
for damage
Figure 237 Disassembly sequence and inspection
points

Mitsubishi S4L Specifications

General

Aspiration	Naturally Aspirated
Fuel Type	Diesel
Cooling System	Water-cooled
Starting System	Electric Starter
Lubrication System	Forced Lubrication
Engine Type	4-stroke, vertical, water-cooled, direct injection diesel engine
Max Power Output	48.5 kW (65 hp) at 2200 rpm