Mitsubishi S4L User Manual

90 / 195
Service Manual Mitsubishi SL-Series diesel engines
Version 08/2004
ENGLISH
Cylinder Block, Crankshaft, Pistons and
Oil pan
ASSEMBLY
90 / 195
To squeeze out a 4 mm (0.2 in.) thick bar, cut the
nozzle of the tube as shown.
2. Tighten the bolts that hold the oil pan to the
cylinder block in a crisscross pattern to the
specified torque.
Figure 134 Oil pan for S3L and S3L2 engines
Figure 135 Cutting sealing compound tube nozzle
Cut nozzle here
Figure 136 Tightening oil pan bolts
Tightening torque
Cast oil pan:
2.8 ± 0.3 kgf·m
(20.3 ± 2.2 lbf·ft)
[27.5 ± 3 N·m]
Plate oil pan:
1.15 ± 0.15 kgf·m
(8.3 ± 1.1 lbf·ft)
[11.3 ± 1.5 N·m]

Mitsubishi S4L Specifications

General

Aspiration	Naturally Aspirated
Fuel Type	Diesel
Cooling System	Water-cooled
Starting System	Electric Starter
Lubrication System	Forced Lubrication
Engine Type	4-stroke, vertical, water-cooled, direct injection diesel engine
Max Power Output	48.5 kW (65 hp) at 2200 rpm