-
29
-
1
5
2
6
3
7
9
4
8
10
4 Initial setting
F4
F1
[Back] [Select]
F4
[Set]
Calendar and clock setting mode
Date, Month, Year and current time are set in
this mode.
(☞ Page 31)
Set ON timer mode*
Date and time to start the refrigeration unit
automatically is set in this mode.
(☞ Page 46)
Set OFF timer mode*
Date and time to stop the refrigeration unit
automatically is set in this mode.
(☞ Page 48)
Contrast setting mode
Screen contrast is adjusted in this mode.
Use “F2 (▲)” switch to intensify the contrast or
“F3 (▼)” switch to diminish the contrast.
Option select/set mode
Press “F2 (Previous)” or “F3 (Back)” switch to
select options 1 to 8.
Press then “F4 (Select)” switch to change to
Option1 (~ 8) setting mode. Press then “F2
(ON)” or “F3 (OFF)” switch to select ON or OFF,
and press “F4 (Set)” switch to nalize the
selection.
LCD backlight setting mode
LCD backlight is set in this mode.
(☞ Page 36)
Controller sound setting mode
Whether the switch operating sound is turned
on or off is set in this mode.
Select ON or OFF by pressing “F2 (ON)” or “F3
(OFF)” switch, and nalize the selection by
pressing “F4 (Set)” switch.
▲ ▼ NextBack
Calendar and clock setting
Enable Disable SetBack
Set ON timer
ON timer disable
Enable
Disable SetBack
Set OFF timer
OFF timer disable
If “F4 (Select)” switch is pressed on each Sub-menu screen on
previous page, the display changes to following screens.
F4
F4
▲High ▼Low SetBack
Contrast setting
F2 F3 F4F1
F2 F3 F4F1
F2 F3 F4F1
Previous Next SelectBack
Option select
Option1 setting OFF
ON
OFF SetBack
Option1 setting
OFF
▲
▼ SelectBack
LCD backlight setting
▲
▼
Always ON
Light SW linked
Lit at key operation only(20sec)
ON
OFF SetBack
Controller sound setting
ON
01 Jan 2021 00:00
* This may not function depending on the specifications of power supply system.
To Next Page
Loading...
