Mitsubishi TEJ50AE - Setting the defrost interval

-
35
-
1
5
2
6
3
7
9
4
8
10
4 Initial setting
Setting the defrost interval
4 初期設定
デフロスト間隔時間設定方法
- 00 -
RUN/STOP
F2
PRESET
MENU
DEFROST
F3 F4F1
1
⇒
Press “MENU” switch.
The display changes to “Main menu” screen.
⇒
Press “F4 (Set)” switch.
The setting completes, and the display returns to the screen of Step 2,
“Main menu”.
5
⇒
Current setting of “Defrost interval
time” is displayed.
2
Press “F2 (▲)” or “F3 (▼)” switch
till the display changes to
“Defrost interval timer”.
3
Press “F4 (Select)” switch.
NOTE
The defrosting can be set at OFF, or
at every 30-minute in the range of
from 0.5 hours to 12 hours.
●
F2 F3 F4F1
F2 F3 F4F1
4
Press “F2 (▲)” or “F3 (▼)” switch
to select a setting time.
F2 F3 F4F1
1
2・4 3・5
▲ ▼ SelectBack
Main menu
▲
▼
Option sensor display
Defrost interval timer
Printer output
▲ ▼ SetBack
Current setting
6.0Hr
▲
▼ SetBack
Current setting
5.5Hr
▲ ▼ SetBack
Current setting
6.0Hr