Mitsubishi TEJ50AE - Setting LCD backlight

-
36
-
1
5
2
6
3
7
9
4
8
10
4 Initial setting
Setting LCD backlight
4 初期設定
LCDバックライト設定方法
- 00 -
RUN/STOP
F2
PRESET
MENU
DEFROST
F3 F4F1
1
⇒
Press “MENU” switch.
he display changes to “Main menu” screen.
⇒
Press “F2 (▲)” or “F3 (▼)” switch
to select the following LCD
backlight setting.
【Light SW linked】
【
Lit at key operation only(20sec) 】
【Always OFF】
【Always ON】
:
Lights interlocked with the lighting of vehicle’s light.
: Lights for 20 seconds only when the switch is operated.
: Always turning off the light.
: Always lighting.
2
Press “F2 (▲)” or “F3 (▼)” switch
till the display changes to
“Sub-menu” screen (Right figure).
3
4
Press “F4 (Select)” switch.
Press “F4 (Select)” switch to
change to “Sub-menu” screen.
Press “F2 (▲)” or “F3 (▼)” switch
till the display changes to “LCD
backlight setting” screen (Right
figure).
1
3・4・5・6・7
F2 F3 F4F1
F2 F3 F4F1
F2 F3 F4F1
２・3・4・5・6
▲ ▼ SelectBack
LCD backlight setting
▲
▼
Always ON
Light SW linked
Lit at key operation only(20sec)
▲
▼ SelectBack
Main menu
▲
▼
Language
Sub-menu
Operating information
▲
▼ SelectBack
Sub-menu
▲
▼
Option select
LCD backlight setting
Controller sound setting
▲Bright ▼Dark SetBack
LCD backlight setting
Brightness light SW-OFF