-
46
-
1
5
2
6
3
7
9
4
8
10
5 Operation
Setting the ON timer
RUN/STOP
F2
PRESET
MENU
DEFROST
F3 F4F1
F2 F3 F4F1
⇒
Press “MENU” switch.
The display changes to “Main menu” screen.
Press “F4 (Set)” switch.
⇒
If Enable is selected by pressing
“F2 (Enable)” switch, go to Step 5.
⇒
When Disable has been selected by pressing “F3 (Disable)” switch, if “F4
(Set)” switch is pressed, the display returns to the screen of Step 3.
⇒
Press “F2 (▲)” or “F3 (▼)” switch,
and set the time (Date) of Set ON
timer.
Press “F2 (▲)” or “F3 (▼)” switch
till the display changes to
“Sub-menu” screen (Right figure).
Press “F4 (Select)” switch to
change to “Sub-menu” screen.
Press “F2 (▲)” or “F3 (▼)” switch
till the display changes to “Set
ON Timer” screen (Right figure).
Press “F4 (Select)” switch to
change to “ON timer enable”
mode (Right figure).
1
2・3・4・5・6・7・8 3・4・5・6・7・8・9
F2 F3 F4F1
F2 F3 F4F1
F2 F3 F4F1
Enable Disable SetBack
Set ON timer
ON timer enable
Enable Disable SetBack
Set ON timer
ON timer enable
▲ ▼ SelectBack
Main menu
▲
▼
Language
Sub-menu
Operating information
▲
▼ SelectBack
Sub-menu
▲
▼
Calendar and clock setting
Set ON Timer
Set OFF Timer
▲
▼ NextBack
Set ON timer
21 Oct 20:25 Starting operation
* This may not function depending on the specifications of power supply system.