Mitsubishi TEJ50AE - Setting calendar and clock

-
31
-
1
5
2
6
3
7
9
4
8
10
4 Initial setting
Setting the calendar and clock (Date, Month, Year)
4 初期設定
時刻（年月日）設定方法
- 00 -
RUN/STOP
F2
PRESET
MENU
DEFROST
F3 F4F1
1
⇒
Press “MENU” switch.
The display changes to “Main menu” screen.
5
Press “F4 (Next)” switch.
⇒
Press “F2 (▲)” or “F3 (▼)” switch
to adjust at current date.
⇒
Press “F2 (▲)” or “F3 (▼)” switch
to adjust at current month.
⇒
Press “F4 (Next)” switch.
Press “F2 (▲)” or “F3 (▼)” switch
to adjust at current year.
2
Press “F2 (▲)” or “F3 (▼)” switch
till “Sub-menu” screen is dis-
played.
3
Press “F4 (Select)” switch to
change to “Sub-menu” screen
(Right figure).
4
Press “F4 (Select)” switch to
change to “Calendar and clock
setting” mode (Right figure).
6
1
２・ ４ ・ 5 ・ 6 ・7・ 8 3・4・5・6・7・8・9
▲ ▼ NextBack
Calendar and clock setting
01 Jan 2021 00:00
F2 F3 F4F1
▲ ▼ NextBack
Calendar and clock setting
01 Jan 2021 00:00
▲
▼ NextBack
Calendar and clock setting
23 Jan 2021 00:00
▲
▼ NextBack
Calendar and clock setting
23 Feb 2021 00:00
▲
▼ SelectBack
Main menu
▲
▼
Language
Sub-menu
Operating information
▲
▼ SelectBack
Sub-menu
▲
▼
Controller sound setting
Calendar and clock setting
Set On Timer
F2 F3 F4F1
F2 F3 F4F1
F2 F3 F4F1
F2 F3 F4F1
- 00 -
Thermostat reset temp. diff. setting mode
Setting of temperature difference between set
temperature and return air temperature in
order to return to operation (thermostat ON) in
automatic start/stop operation. Setting is
1~6°C which can be changed in the unit of
0.5°C. (2°C at shipping)
Out of adequate range temp. setting mode
Setting allowable return air temperature range
against set temperature. Setting is 1~5°C
which can be changed in the unit of 1.0°C.
(5°C at shipping and OFF is selectable)
▲ ▼ SetBack
Thermostat reset temp. diff. setting
2.0℃
▲
▼ SetBack
Out of adequate range temp. setting
4.0℃