Mitsubishi TEJ50AE - 5 Operation; Operation pattern selection (TEJ50 AE)

-
39
-
1
5
2
6
3
7
9
4
8
10
5 Operation
Selecting the operation pattern (TEJ50AE only)
5 運転方法
運転パターンの選択方法
1
⇒
- 41 -
RUN/STOP
F2
PRESET
MENU
DEFROST
F3 F4F1
Start-Stop Continuous SetBack
Current setting
Start-Stop operation
[Select with MENU switch]
Press “MENU” switch.
The display changes to “Main
menu” screen.
2
Press “F4 (Select)” switch to
change to “Operation pattern
selection” screen (Right figure).
⇒
Start/Stop display lights when
the Start/Stop operation is set.
Start-Stop Continuous SetBack
Current setting
Start-Stop operation
3
Press “F2 (Start-Stop)” or “F3
(Continuous)” switch to select the
automatic Start/Stop operation
or the continuous operation.
4
⇒
Press “F4 (Set)” switch.
The setting completes, and the display returns to the normal display screen.
Start-Stop Continuous SetBack
Current setting
Continuous operation
F2 F3 F4F1
F2 F3 F4F1
F2 F3 F4F1
. 7 20
▲
°
C
-
▼
Set
Cooling
0 - .
°
C
30
S-S⇔Cont
⇒
The display changed to the mode
screen of Step 2 below.
1
[Select with F4 switch] (Recommand)
On the normal display screen
(Right figure), press “F4 (S-S⇔
Cont)” switch.
▲ ▼ SelectBack
Main menu
▲
▼
Defrost interval timer
Operation pattern(S-S⇔Cont)
Printer output
F2 F3 F4F1
1
1
3 ２・４
[MENU switch]
[F4 switch]