Mitsubishi TEJ50AE - Starting the operation; Stopping the operation (Normal;Emergency)

-
41
-
1
5
2
6
3
7
9
4
8
10
5 Operation
Starting the operation
5 運転方法
- 00 -
⇒
LCD indicates the inside compartment temperature and the setting tempera-
ture.
When the unit is connected to the commercial power supply, LCD indicates
the display for commercial power supply.
運転方法
RUN/STOP
F2
PRESET
MENU
DEFROST
F3 F4F1
1
Press “RUN/STOP” switch.
(The refrigeration unit is turned “ON”.)
1
停止方法
RUN/STOP
F2
PRESET
MENU
DEFROST
F3 F4F1
1
. 7 20
▲
°
C
-
▼ S-S⇔Cont
Set
Cooling
0 - .
°
C
30
. 7 20
▲
°
C
-
▼ S-S⇔Cont
Set
Cooling
0 - .
°
C
30
Normal stop procedure
⇒
Stops the operation after the unit protection operation has been performed
for 10 to 20 sec. or longer.
1
Press “RUN/STOP” switch.
(The refrigeration unit is turned “OFF”.)
Emergency stop procedure
1
Hold down “RUN/STOP” switch, and then release the switch when the
refrigeration unit stops.
2
When you have performed the emergency stop, be sure to contact the
nearest dealer.
Stopping the operation