Mitsubishi TEJ50AE - Page 43

-
37
-
1
5
2
6
3
7
9
4
8
10
4 Initial setting
- 00 -
4 初期設定
7
Press “F4 (Set)” switch.
The setting completes, and the display returns to “Sub-menu” screen of
Step 3.
⇒
⇒
Adjust the brightness of the LCD
backlight, when the vehicle’s
light is OFF, pressing “F2 (▲
Bright)” or “F3 (▼Dark)” switch.
⇒ Step 6
5
Press “F4 (Select)” switch.
【Light SW linked】
F2 F3 F4F1
⇒
Step 7
【Lit at key operation only(20sec)】
⇒
Step 7
【Always OFF】
⇒
Adjust the brightness of the LCD
backlight, when the vehicle’s light
is ON, pressing “F2 (▲Bright)” or
“F3 (▼Dark)” switch. ⇒ Step 7
6
Press “F4 (Next)” switch.
【Light SW linked】
F1 F3 F4F2
F3 F4F2F1
⇒
Adjust the brightness of the LCD
backlight for Always ON by
pressing “F2 (▲Bright)” or “F3
(▼Dark)” switch. ⇒ Step 7
【Always ON】
F4F3F2F1
F1 F3 F4F2
▲Bright ▼Dark NextBack
LCD backlight setting
Brightness of light SW-OFF
SetBack
LCD backlight setting
Lit at key operation only(20sec)
SetBack
LCD backlight setting
Always OFF
▲Bright
▼Dark SetBack
LCD backlight setting
Brightness of always ON
▲Bright
▼Dark SetBack
LCD backlight setting
Brightness of light SW-OFF