-
54
-
1
5
2
6
3
7
9
4
8
10
7 Inspection
Do not start maintenance without more than 5 minutes
after stopping operation.
• Refrigerant pipes are dangerously hot. There is risk of burn if
touched carelessly.
Before performing the inspection or cleaning work, stop
the refrigeration unit using the RUN/STOP switch, shut
down the power to the power system, and disconnect
the battery terminals and the plug of the power cord.
After that, when 5 min. or longer elapse, start the
inspection or cleaning work.
• Otherwise, it may cause injury or an electric shock due to
unexpected start.
Apply the parking brake and put chocks under wheels
during inspection.
• If the vehicle moves, it could cause injury or accident.
For details about how to inspect the power system, please read the instruction
manual for power system.
To Next Page
Loading...
