Mitsubishi UD8350 User Manual

EN-33
IMAGE menu
COMPUTER
0
COLOR
0
TINT
0SHARPNESS
ADVANCED MENU
NCM
SUPER RESOLUTION
IMAGE
1
1
2
2
BRIGHTNESS 0
COLOR ENHANCER
AUTO
CONTRAST
STANDARDCOLOR TEMP.
opt.
IMAGE
ADVANCED MENU
1 2
opt.
NOISE REDUCTION
CTI
INPUT LEVEL
OFF
CLOSED CAPTION
OFF
OFF
0
12
0
ENTER
OFF
ITEM SETTING FUNCTION
COLOR ENHANCER AUTO Select to optimize the settings automatically depending on the input signal.
(Select this option for normal use.)
PRESENTATION Select to make the displayed image look bright and crisp.
STANDARD Select to make the displayed image look natural.
THEATER This option, suitable for viewing movies, makes the displayed image look soft
and smooth.
sRGB Select to give priority to the color reproducibility.
USER Select to set the gamma curve or set BrilliantColor™. (See page 43.)
MULTI-SCREEN You can set the gamma curve and BrilliantColor™ in the multi-screen
application.
SUPER RESOLUTION ON / OFF Use to emphasize the fineness of the image. (See page 44.)
CONTRAST ±30 Use to adjust the contrast of the projected image. (See page 42.)
BRIGHTNESS ±30 Use to adjust the brightness of the projected image. (See page 42.)
NCM COMPUTER / VIDEO Use to adjust the predetermined tone of each color.
USER Use to emphasize only certain colors or to correct the tonal deviation of only
certain colors. (See page 44.)
OFF NCM doesn’t work.
COLOR TEMP. STANDARD / LOW /
HIGH
Select from the predetermined color temperatures.
USER Use to adjust the color temperature to a desired value. (See page 42.)
COLOR ±10 Use to adjust the color thickness of the projected image. (See page 42.)
TINT ±10 Use to adjust the color tint of the projected image. (See page 42.)
SHARPNESS ±5 Use to adjust the sharpness of the projected image. (See page 42.)
ADVANCED MENU ENTER The ADVANCED MENU is displayed for the following settings.
NOISE REDUCTION ON / OFF Use to reduce noise and roughness in the image when noisy video signal is input.
CTI ON / OFF Use to correct smeared color boundaries.
INPUT LEVEL ±5 For analog signal input:
The input level of video signal differs among devices to be connected. High
input level causes solid white in displayed image and low input level causes
displayed image to get dark. Use this menu to adjust the input level of analog
video signal.
AUTO /
ENHANCED /
NORMAL
For digital signal input:
AUTO: The proper setting is automatically selected. (Selectable only
when HDMI signal is input.)
ENHANCED: Select when solid black occurs.
NORMAL: Select when grayish black occurs.
(See page 28.)
CLOSED CAPTION OFF Does not display captions.
CC1 / CC2 Displays captions.
• WhenEDGEBLENDINGisONorCOLORMATCHINGisMANUALorMEASUREintheMULTI-SCREENmenu,youcansetonly
MULTI-SCREEN in the COLOR ENHANCER menu. In this case, you cannot set any other items than MULTI-SCREEN.
• YoucansetMULTI-SCREENintheCOLORENHANCERmenuonlywhenEDGEBLENDINGisONorCOLORMATCHINGis
MANUAL or MEASURE.
• WhenCOLORENHANCERissRGB,COLORTEMP.,COLOR,TINTandNCMcan’tbeadjusted.
• WhenthesettingofCOLORENHANCERischanged,thedisplayedimagemaybedisturbed.
• TheeffectobtainedwhenSUPERRESOLUTIONisONvariesdependingonthetypeandresolutionoftheinputimage.
• WhentheCOMPUTER1,COMPUTER2,DVI,HDMIorSDI(forUD8400UandUD8400LUonly)isselectedastheinputsource,
COLOR and TINT can’t be adjusted.
• TINTisavailableonlywhentheNTSCsignalisinput.
• INPUTLEVELisunavailablewhenthedigitalsignalissuppliedfromtheYC
B
C
R
/YP
B
P
R
terminal of the connected device.
• Captionsarenotdisplayedwhileinformationaboutthemenuorinputsignalselectionisbeingdisplayedonthescreen.
• TheclosedcaptionfunctiondisplaystextinformationincludedintheNTSCsignal,whichismainlyusedforTVbroadcastingin
North America.
Menu operation (continued)

Mitsubishi UD8350 Specifications

General

Brand	Mitsubishi
Model	UD8350
Category	Projector
Language	English