MK Welding Multi-GMAW 200 LCD PFC - §2.2 Technical Data

OPERATION
10
EN
MIG series of welding machines has built-in automatic protection functions to protect the machines
from over-voltage, over-current and over-heat. If any one of the above problems happens, the LCD
on the front panel will be display error code and output current will be shut off automatically for the
machine to protect itself and prolong the equipment using life.
MIG series Features:
1. Digital control system, real-time display the welding parameters;
2. High performance multifunction power source (MIG/MAG);
3. Waveform control, stable welding arc;
4. IGBT technology, low power consumption;
5. Rated Duty Cycle：
POWER MIG 250 LCD = 250A @ 60%(40°C)
MIG series of welding machine is suitable for all positions welding for various plates made of
stainless steel, carbon steel, alloyed steel etc. Applications applied to pipe installment, petrochemical,
architecture equipment, car repair, bicycle repair, handicraft and common steel fabrication.
MAG = Metal Active Gas Welding
MIG = Metal Inert Gas Welding
§2.2 Technical Data
Models
Parameters
MULTI-GMAW 250-3 LCD
Input Voltage（V）
3~380V±10%
Frequency (HZ)
50/60
MIG
TIG
MMA
Input Current（A）
15.1
13.3
18.2
Input Power（KW）
7.4
6.1
8.9
Welding Current（A）
15-250
10-250
10-250
Welding Voltage（V）
16-26.5 (MIG)
No-load Voltage（V）
15
Duty cycle（40℃）
60% 250A
100% 195A
Diameter (mm)
Fe:0.6/0.8/0.9/1.0/1.2
SS:0.8/0.9/1.0/1.2
Flux-Cored:0.6/0.8/0.9/1.0/1.2
Al:1.0/1.2
Protection class
IP23
Insulation class
H
Dimensions（mm）
550*230*540
Weight（Kg）
26
Power Factor
0.7