SAFETY
§1 Safety
Welding and cutting equipment can be dangerous to both the operator and people in or
near the surrounding working area, if the equipment is not correctly operated.
Equipment must only be used under the strict and comprehensive observance of all
relevant safety regulations. Read and understand this instruction manual carefully
before the installation and operation of this equipment.
§1.1 Symbols Explanation
The above symbols mean warning!
Notice! Running parts, getting an electric shock or making contacts with thermal parts
will cause damage to your body and others. The underline message is as follows:
Welding is quite a safe operation after taking several necessary protection
measures!
§1.2 Machine Operating warnings!
The following symbols and words explanations are for some damages to your body
or others, which could happen during the welding operation. While seeing these
symbols, please remind yourself and others to be careful.
Only people who are trained professionally can install, debug, operate, maintain and
repair the welding equipment covered with this Operator’s Manual!
During the welding operation, non-concerned people should NOT be around,
especially children!
After shutting off the machine power, please maintain and examine the equipment
according to §7 because of the DC voltage existing in the electrolytic capacitors at the
output of the power supply!
To Next Page
Loading...